MAJORITY Eversden - FM Radio Settings

13
Instrucons Guide
When on FM mode, press the Menu button (Ref.) on the radio
to open FM radio settings. Once pressed, the following options
will be available to scroll through with the Scroll/Select dial
(Ref.): Scan setting, Audio setting and System. One of these
options can then be selected to open further setting options.
Scan setting
Select this option to decide whether the autoscan option will
scan for all available stations or for strong stations only. Use the
Scroll/Select dial to scroll between two options: “Strong stations
only” or “All stations”. Select your chosen option by pressing
down the Scroll/Select dial.
Audio setting
The radio will automatically switch between stereo and mono
mode, but you can switch this function manually which is useful
when receiving poor signal reception.
Once “Audio setting” is selected, the radio will display “Stereo
allowed” or “Forced mono”. Select your chosen setting by
pressing down the Scroll/Select dial.
System
View system setting options from page 17 of the manual.
FM Radio Settings