19
Settings: Dual Alarm
Instrucons Guide
Setting Alarm 1/Alarm 2
Please ensure that the radio is being mains powered when
setting the alarm.
Press the Menu button (Ref.6) to open menu settings. Once
menu settings open, scroll to the “System” option with the Scroll/
Select dial (Ref.5) and select it by pressing down the dial. Once
on System options, select the option for ‘Alarm’ to begin setting
the alarm(s):
1. Once the ‘Alarm’ option has been selected, “Alarm 1” will
display on the screen. Use the Scroll/Select dial to scroll to the
“Alarm 2” option. Select the alarm you wish to set by pressing
down the Scroll/Select dial.
2. Once selected, “Alarm X Setup” will display on the screen. Press
down the Scroll/Select dial to conrm set up.
3. “Alarm X Wizard On Time” will now display and the hour unit
of the clock will begin ashing. Use the Scroll/Select dial to
scroll up or down the alarm clock hour and select the alarm
hour by pressing down the dial. Repeat the same process for the
minutes.
4. The “Duration” will now display on the screen, which indicates
the length of time that the alarm will sound before switching
o automatically. Choose between 15, 30, 45, 60 90 and 120
minutes and select by pressing down the Scroll/Select dial.
5. The “Source” will now display, which indicates the alarm tone
that you would like to choose from. The options are Buzzer, DAB
To Next Page
Loading...
Need help?
General