8
Press the ‘Mode’ button (Ref.4) multiple times to switch between
DAB and FM. The rst time you do this, the FM frequency “87.5
MHz” will be displayed on the screen.
Fully extend the antenna (Ref.13).
To auto scan, press and release the ‘Scan’ button (Ref.5). This will
then start scanning up the frequency band and play the rst
station it nds with good signal.
To scan down the frequency band, press and hold the ‘Scan’
button (Ref.5) for a few seconds.
The radio will display station information when you press the
‘Info/Menu’ button (Ref.6), press multiple times to view all
information. Please see page 11 for further details.
To tune a specic frequency manually
To listen to a specic frequency press and hold ‘Next’ (Ref.9) to
search forward quickly and ‘Prev’ (Ref.8) to search back quickly. It
will stop searching when the button is released. To search slowly
press the ‘Next’ (Ref.9) and ‘Prev’ button (Ref.8) multiple times
rather than holding.
FM Radio
Instrucons Guide