MAJORITY Skiddaw II User Manual

10
Instrucons Guide
You will need: An audio source with an Optical Audio Output and a Digital
Optical Audio cable (not included)
Connect the Digital Optical Audio cable to the optical output on
the audio source and to the Optical Input on the speaker bar.
Press the POWER/SOURCE button on side panel (Ref.) or
POWER button directly on the remote control (Ref.) to switch
on the unit.
Press the INPUT button on the remote control (Ref.)
repeatedly to switch to Optical mode or press the POWER/
SOURCE button on main unit (Ref.) repeatedly to select the
Optical mode. The mode indicator LED will turn Yellow.
Using the native controls on your connected device, make
sure the audio settings are set to PCM or Optical Audio and are
turned On.
Audio from the connected audio source will now be played
through the speakers.
AUX1 IN
OPTICAL IN
DC 15V
L
R
AUX1 IN
OPTICAL IN
DC 15V
L
R
Rear view of the unit
OPTICAL cable
Using the Optical Input

MAJORITY Skiddaw II Specifications

General

Brand	MAJORITY
Model	Skiddaw II
Category	Speakers
Language	English