MAJORITY Skiddaw II - Using the MP3 LINK Connection (Line In)

11
Instrucons Guide
Plug one end of a 3.5mm audio input cable (included) into the
Line in on the unit (Ref.). Before use, disconnect any cables
connected to the Stereo RCA Inputs.
Plug the other end of the cable into the audio output/
headphone output on an MP3 player or other audio source.
Press the POWER/SOURCE button on side panel (Ref.) or
POWER button directly on the remote control (Ref.) to switch
on the unit.
Press the POWER/SOURCE button repeatedly or directly press
the INPUT button on remote control (Ref.) to enter LINE in
mode. The mode indicator will turn green.
Audio played through the connected device will now be heard
through the speakers.
Side view of the unit
Audio device
3.5mm to 3.5mm
audio cable
Using the MP3 LINK Connection (Line In)