19
The Channels of the 0-CTRL
The 0-CTRL has three sequencer channels: Pitch, Strength, and Time. Each channel consists of eight knobs
and an output jack. Together, Pitch, Strength, and Time represent the standard musical parameters of pitch,
dynamics, and rhythm. Thus by dialing in values on the knobs of these three channels, you may create just
about any musical phrase you wish to, and probably quite a few that you don’t.
The Pitch Channel is typically patched to the 1v/oct or Pitch CV input on an oscillator.
As with all the Channel outputs, the Pitch CV output can be patched to any voltage-controlled parameter,
including but not limited to Pitch. Use a stacking patch cable to send it to multiple places.
The Strength and Time Channels contain CV attenuators for the Strength and Time parameters
respectively.
To Next Page
Loading...
