9
Connecting Power
It is recommended that the 0-CTRL AC Adapter is plugged into a fuse-protected power strip with an On/Off
switch; however, if that is not available, it is OK to plug it into a wall outlet. Use only the Make Noise 0-
CTRL/0-Coast 15VDC Center Positive AC Adapter to power the 0-CTRL. To turn on your 0-CTRL, once you
have plugged the AC Adapter into your AC outlet, attach the other end of the AC Adapter to the jack on the
side of the 0-CTRL.
To Next Page
Loading...
