- 17 -
A
B
B
A
A
+
The clamp moves automatically when cutting
is activated.
The paper can be pressed in advance, with the
foot pedal.
Cutting is activated by pressing both actuators
(A) on the front table.
Cutting activation:
Press both actuators of the two-handed control
system (A) simultaneously and keep them
pressed until the paper is completely cut.
The safety area (B) must be free.
To interrupt or stop cutting:
To interrupt or stop cutting, release
both actuators (A) of the two-hand control.
•
Operation
•
Symbols for cutting activation:
Cutting sequence with automatic clamping.
To Next Page
Loading...
