MakerBot Sketch - Material Spool and System Details; Electrical, Software, and File Support

MAKERBOT SKETCH MANUAL
PAGE 8
MakerBot (.makerbot), STL (.stl)
[ SolidWorks (.sldprt, .sldasm), InventorOBJ (.ipt, .iam), IGES (.iges, .igs), STEP
AP203/214 (.step, .stp), CATIA (.CATPart, .CATProduct), Wavefront Object (.obj),
Unigraphics/NX (.prt), Solid Edge (.par, .asm), ProE/Creo (.prt, .prt., .asm, .asm.),
VRML (.wrl), Parasolid (.x_t, .x_b) ]
LVD,WEEE, RoHS, Packaging, RED
100-240VAC~ 50/60 Hz, 2.7-1.3A
MakerBot Print, MakerBot Connect (Visit MakerBot.com for full list)
SolidWorks, Autodesk Fusion 360, Onshape, Autodesk Inventor
Windows (7, 10), Mac OS X (10.12+) NOTE: Does not support Mac Catalina
USB flash drive, Ethernet, Wi-Fi
IEC/ EN/ UL60950-1, IEC/ EN/UL 62368-1
File Types
[Windowys Only]
Directives
Power Requirements
Soware Bundle
CAD Plugins
Operating Systems
Connectivity
Safety Standards
SAFETY & COMPLIANCE
ELECTRICAL
SOFTWARE
1.75mm [0.069in]
Sketch Material Spool
Weight = 1kg [2.2lb] Diameter = 203mm [8in]
Open Filament System
Material Spools
Spool Type
Spool Size
System
MATERIAL SPOOLS