Do you have a question about the Makita DHP343 and is the answer not in the manual?
| Voltage | 18V |
|---|---|
| Battery Type | Li-ion |
| No Load Speed (Lo) | 0 - 400 rpm |
| Max. in steel | 13 mm |
| Max. in masonry | 13 mm |
| Torque Settings | 16 + Drill |
| Length | 198 mm |
| Type | Hammer Drill |
| No Load Speed (Hi) | 0-1, 500 rpm |
| Impacts per minute (Hi) | 22500 ipm |
| Impacts per minute (Lo) | 6000 ipm |
Loading...