Why does the lamp flash 5 or 7 times on my Makita DRC200 Vacuum Cleaner?
If the Makita Vacuum Cleaner overheats, turn it OFF, remove the battery cartridge(s), and wait for an hour. Ensure that you use the Robotic Cleaner only at room temperatures not exceeding 40°C (104°F). The overheating is the reason for this issue.
Why is the cruising speed not constant on my Makita Vacuum Cleaner?
If an obstacle is detected, the vacuum cleaner will slow down as it takes time to calculate a traveling direction. This is not a malfunction.
What to do if lamps light up on my Makita DRC200?
If the lamps light up on your Makita Vacuum Cleaner, turn the Robotic Cleaner OFF and then ON because an error has occurred.
Why is my Makita Vacuum Cleaner so loud?
If the operating sound of your Makita Vacuum Cleaner is louder than usual, empty the dust box and clean the filter, the side brushes, and the main brush.
Why is my Makita Vacuum Cleaner hitting obstacles more often?
If your Makita Robotic Cleaner is hitting obstacles more frequently, try cleaning the ultrasonic sensors.
Why aren't the side brushes rotating on my Makita DRC200 Vacuum Cleaner?
If the side brushes on your Makita Vacuum Cleaner do not rotate or rotate with difficulty, clean the side brushes and the main brush. Install the main brush and the plate correctly.
How to fix my Makita DRC200 Vacuum Cleaner from falling down stairs?
If your Makita Robotic Cleaner falls down stairs or to a lower floor, clean the cliff sensors.
What to do if the Makita DRC200 Vacuum Cleaner remote control does not work?
If the remote control for your Makita Vacuum Cleaner isn't working, ensure the batteries are correctly installed, or try replacing them with new ones. Make sure the Robotic Cleaner is turned ON. Move closer to the Robotic Cleaner or remove any obstacles between it and the remote. Avoid using the Robotic Cleaner near equipment that uses radio frequencies in the 2.4 GHz band. You can also try turning the Robotic Cleaner OFF and then ON again.
What to do if my Makita DRC200 Vacuum Cleaner stops operation during cleaning?
Turn the vacuum cleaner off, and then remove any cords, strings, etc. from the drive wheels. If the vacuum cleaner has gotten stuck on a barrier or other obstacle, move it to a different location.
Why does the exhaust air from my Makita DRC200 smell?
If the exhaust air from your Makita Vacuum Cleaner smells, you should empty the dust box and clean the filter.
General| Battery life | 500 m² |
|---|---|
| Battery voltage | 18 V |
| Battery technology | - |
| Shape | Round |
| Product color | Black, Blue |
| Dust container type | Bagless |
| Dust capacity (total) | 2.5 L |
Weight and Dimensions| Depth | 460 mm |
|---|---|
| Height | 180 mm |
| Weight | 7800 g |
Critical safety guidelines, intended use, and warnings.
Lists environments and situations where the cleaner must not be used.
Critical safety measures for handling and using battery cartridges.
How to start, pause, resume, and stop the cleaning cycle.
Guidance on recognizing error indicators and basic reset steps.
To Next Page
