What to do if the auto-on timer on my Makita DRC200 Vacuum Cleaner does not work?
If the auto-on timer on your Makita Vacuum Cleaner isn't working, make sure you are using fully charged battery cartridges. You may also need to reactivate the auto-on timer.
Why does the exhaust air from my Makita DRC200 smell?
If the exhaust air from your Makita Vacuum Cleaner smells, you should empty the dust box and clean the filter.
What to do if my Makita DRC200 Vacuum Cleaner stops operation during cleaning?
Turn the vacuum cleaner off, and then remove any cords, strings, etc. from the drive wheels. If the vacuum cleaner has gotten stuck on a barrier or other obstacle, move it to a different location.
What to do if the Makita DRC200 Vacuum Cleaner remote control does not work?
If the remote control for your Makita Vacuum Cleaner isn't working, ensure the batteries are correctly installed, or try replacing them with new ones. Make sure the Robotic Cleaner is turned ON. Move closer to the Robotic Cleaner or remove any obstacles between it and the remote. Avoid using the Robotic Cleaner near equipment that uses radio frequencies in the 2.4 GHz band. You can also try turning the Robotic Cleaner OFF and then ON again.
How to fix my Makita DRC200 Vacuum Cleaner from falling down stairs?
If your Makita Robotic Cleaner falls down stairs or to a lower floor, clean the cliff sensors.
What to do if Makita DRC200 side brushes fall off?
If the side brushes of your Makita Vacuum Cleaner fall off, install the side brushes correctly.
Why won't my Makita Vacuum Cleaner turn on?
If the lamps on your Makita Vacuum Cleaner do not light up when you press the button or it does not operate, install the battery cartridges correctly, fully charge them, and press the button to turn the Robotic Cleaner ON.
What to do if my Makita DRC200 stops during cleaning?
If your Makita Vacuum Cleaner stops during cleaning, turn it OFF, and remove any cords or strings from the drive wheels. If it's stuck on an obstacle, move it to a different location.
What to do if the remote control of my Makita DRC200 does not work?
If the remote control for your Makita Vacuum Cleaner isn't working, first ensure the batteries are correctly installed, and try replacing them with new ones. Also, make sure the Vacuum Cleaner is powered ON. Try moving closer to the Vacuum Cleaner or removing any obstructions between the remote and the device. Interference from other devices using the 2.4 GHz band, such as microwaves or Wi-Fi devices, can also cause issues, so move the Vacuum Cleaner away from such equipment. Finally, try turning the Vacuum Cleaner OFF and then ON again.
How to fix side brushes that do not rotate on a Makita DRC200 Vacuum Cleaner?
If the side brushes on your Makita Vacuum Cleaner are not rotating properly, clean the side brushes and the main brush. Also, ensure that the main brush and the plate are correctly installed.
General| Battery life | 500 m² |
|---|---|
| Battery voltage | 18 V |
| Battery technology | - |
| Shape | Round |
| Product color | Black, Blue |
| Dust container type | Bagless |
| Dust capacity (total) | 2.5 L |
Weight and Dimensions| Depth | 460 mm |
|---|---|
| Height | 180 mm |
| Weight | 7800 g |
Critical safety guidelines, intended use, and warnings.
Lists environments and situations where the cleaner must not be used.
Critical safety measures for handling and using battery cartridges.
How to start, pause, resume, and stop the cleaning cycle.
Guidance on recognizing error indicators and basic reset steps.
To Next Page
