Need help?Do you have a question about the Makita DTW302Z and is the answer not in the manual?
Guides on choosing the right impact socket for fasteners.
General| Voltage | 18V |
|---|---|
| No Load Speed | 0 - 2, 600 RPM |
| No Load Speed (RPM) | 0 - 2, 600 RPM |
| Net Weight | 1.5 kg |
| Impact Rate | 0 - 3, 600 IPM |
| Chuck Size | 1/2" |
| Driving Shank | 1/2" Square |
| Impact Rate (IPM) | 0 - 3, 600 IPM |
| Battery Type | Lithium-ion |
| No-load Impacts Per Minute | 0 - 3, 600 IPM |
| Chuck Type | 1/2" square drive |
To Next Page
