Need help?Do you have a question about the Makita HP1501 and is the answer not in the manual?
General| Type | Hammer Drill |
|---|---|
| Power Source | Corded |
| Chuck Size | 13mm |
| Max. Drilling Diameter in Concrete | 15 mm |
| Max. Drilling Diameter in Steel | 13mm |
| Max. Drilling Diameter in Wood | 25 mm |
| Chuck Type | Keyless |
| No Load Speed (Hi) | 0-2800 RPM |
| Impact Rate (Hi) | 44800 bpm |
Guidelines for maintaining a safe and organized work environment to prevent accidents.
Critical safety measures related to electrical hazards and tool usage to prevent shock.
Advice on dressing properly and maintaining situational awareness for personal safety.
Proper techniques for operating and maintaining the tool to ensure safety and longevity.
Recommendations for selecting and using appropriate extension cords for power tools.
Key safety instructions specific to the operation of the hammer drill.
Explanation of how to use the switch trigger and lock button for tool control.
How to change the direction of the tool's rotation using the reversing switch.
Instructions for attaching and positioning the side grip for better control.
Step-by-step guide on how to insert and remove drill bits from the chuck.
How to set and use the depth gauge for drilling uniform holes.
Detailed steps for effective hammer drilling in concrete and similar materials.
Instructions for using the optional blow-out bulb to clean drilled holes.
Cautions regarding pressure, bit sticking, and securing workpieces during drilling.
Tips for drilling wood with guide screw bits for better results.
Techniques for drilling metal, including center-punching and using lubricant.
Guidance on maintenance, authorized repairs, and using genuine replacement parts.
A list of accessories recommended for use with this Makita tool.
Directory of Makita factory and authorized service centers across Canada.
Explanation of the terms, conditions, and exclusions of the one-year limited warranty.
To Next Page
