10 03/09
125 - 160 cc
BlogBlog
BlogBlog
Blog
1.9 1.9 1.9
(27.6) (27.6) (27.6)
2.0 2.1 2.1
(29.0) (30.5) (30.5)
TYRES
Type: Tubeless (without inner tube)
It is possible to use tyres with load and speed indexes that are higher than
or identical to those indicated.
It is however necessary for speed indexes to be identical for both tyres.
USE ONLY TYRES WITH THE RELEVANT TYPE APPROVAL.
• There are T.W.I. marks all around the tyre sides. These correspond to tyre wear
indicators situated in the tyre’s tread; if there is no difference between the thickness
of the tyre wear indicators and the tread depth, the tyre must be replaced.
F. 6
F. 5
Minimum tread depth (front and rear) is 2 mm (F. 6).
Tyre inflation pressure must be adjusted while the tyre is at ambient
temperature.
Pressure differing from that indicated can lead to higher fuel
consumption, irregular wear of the tire, impaired vehicle performance
and riding conditions.
PRESSURE
To Next Page
Loading...
Need help?
General
