2 03/09
125 - 160 cc
BlogBlog
BlogBlog
Blog
MALAGUTI S.p.A.
Via Emilia 498, 40068 - San Lazzaro di Savena (BO) - ITALY
Tel. 051.62.24.811 - Fax 051.69.47.782
e-mail: info@malaguti.com - http: // www.malaguti.com
FOREWORD
• This manual specifically addresses to specialised technical personnel (MALAGUTI authorised service centres and single motor mechanics) and contains all the
service interventions indicated by the Manufacturer until the publishing of this document.
• Some basic technical information has been intentionally omitted as it is considered to be common knowledge.
• Additional information is available in the SPARE PARTS CATALOGUES of each model.
• It is important to read all the general information before going through the manual to the specific topics and the maintenance operations to be carried out on the motor-bike in
order to make sure the topics, the technical and safety concepts are clearly understood and the manual can be used as a sure reference text.
• All checks, maintenance, repairs or replacements of spare parts in our motor-bikes are to be performed by skilled and expert technical personnel with specific experience
in state-of-the-art technology and full knowledge of the quickest and most rational procedures, technical characteristics, setting values, tightening torques and information as
to which may only be properly and exhaustively provided by the manufacturer.
• It is important to adhere strictly to the following instructions. Any operation carried out carelessly or not carried out at all may lead to personal injury, damage to the motorcycle
or simply to complaints.
MALAGUTI S.p.A. reserves the right to make any changes and modifications hereto it deems necessary without prior notice.
For further information and details, please contact MALAGUTI S.p.A. Servicing or Engineering Division.
To Next Page
Loading...
Need help?
General
