Malmet WDS1 - Cycle of Operation

Bedpan / Urinal Bottle and Utensil / Bowl Washer Disinfector (WDS)
Operation, Maintenance and Installation Manual
Issue 16 Page 20 August 22
4.0 Cycle of Operation
1. Press POWER ON button; display shows:
POWER
After short delay display shows alternating
OPEN
DOOR
2. Open door; display shows:
OPENING
3. When door is open; display shows:
LOAD
ITEMS
After a short delay, display shows the cycle selection based on the rack positions (Urine, Bedpan & Urine or
Bowl)
SELECT
CYCLE
If the wrong cycle has been selected for the position of the racks; an audible alarm will sound and display
briefly shows: Check rack position and cycle selected match load type being processed.
WRONG
RACK
Then
SELECT
CYCLE
POWER
OPENING
LOAD-ITEMS
SELECT-CYCLE
WRONG-RACK
OPEN-DOOR