Bedpan / Urinal Bottle and Utensil / Bowl Washer Disinfector (WDS)
Operation, Maintenance and Installation Manual
Issue 16 Page 54 August 22
6.5.12 Clearing the System Log Data and Reset Cycle Counter
The log data stored in the system FLASH memory can be cleared by connecting a PC with the USB port and setting
the system to diagnostics mode
To clear only the log data – Use command ’34 4892 [Enter]’
To clean only the log data and reset the Cycle Counter – Use command ’34 5903 [Enter]’
To Next Page
Loading...
