The first menu selection in the Heads menu is
Multi-Print. Multi-Print Up/Down commands the
print carousel to remain in the Up (print) position
until all print strokes are completed. When
selected to Down, the print carousel lowers to the
index position when the last print head completes
the print stroke for the first print. The index
carousel then moves up for the start of the second
print stroke.
The next menu selection in the Heads menu is
Multi Switch. When the button displays 2 or 2-9,
the control system commands individual print
stations to perform double or up to nine flood print
strokes.
To select print stations for multi operation, press
the button to the right of Multi-Switch until the
button displays 2. Now place the Single/Multi
switch on the main control panel in the Multi
position. The table below the Multi-Switch reflects
your selection for two print strokes for the selected
print heads by displaying the number 2.
To select print stations for 2-9 print strokes, press
the button to the right of Multi-Switch until the
button displays 2-9.
Note: The Single/Multi switch on the main control panel
must be in the Multi position.
In the print head table below the Multi-Switch
menu selection, press the data entry cell below
the print head you want to select for Multi
operation. A new screen is displayed which shows
the print station position on the press. Now press
the data entry cell for the print head to be selected
for multiple print strokes; a numeric keypad is
displayed. Press number keys (3 to 9) then press
Enter. Your selection for print strokes is now
displayed in the data entry cell. Press the Back
Arrow to return to the HEADS screen. The table
below the Multi-Switch reflects your selection for
print strokes for that print head by displaying a
number 3-9.
To Next Page
Loading...
