V.033114
M&R Companies 1N 372 Main St. Glen Ellyn, IL 60137 USA 29
Tel: +630-858-6101 Fax: +630-858-6134 www.mrprint.com | store.mrprint.com
Low Oil
Indexes
Present
Total
The oil level in the oil reservoir for the index servo
drive system is monitored by a sensor which alerts
the operator to insufficient oil for lubrication. The
oil level may be monitored using the Low Oil
Indexes menu selection.
Present displays how many index cycles have
occurred since the low oil sensor detected a low
oil condition.
Total displays how many total index cycles have
occurred after a low oil condition since the press
was first put into service.
Press the Back Arrow to return to the previous
menu screen.
Mega-Stamp is the M&R optional foil application
system used with the press.
To access the Mega-Stamp menu selection,
press the Mega-Stamp button on the Options
menu screen.
Mega-Stamp
Mega-Stamp
Head Location
The Mega-Stamp menu includes control menus
used on both the M&R Mega-Stamp and the M&R
Midas foil loading system. The four Mega-Stamp
menu selections are displayed in red and the three
Midas menus are displayed in yellow.
To activate or deactivate the Mega-Stamp, press
the Disabled button to the right of Mega-Stamp.
The indication changes to Enabled and the Mega-
Stamp is activated. To deactivate the Mega-
Stamp, press the button again.
Head Location is used to select the print head in
which the M&R Mega-Stamp will operate.
To use, press the data entry cell to the right of
Mega-Stamp; a numeric keypad is displayed.
Enter the print head location where the Mega-
Stamp will be operating and then press Enter.
To Next Page
Loading...
