M&R Challenger 2 - Page 31

V.033114
M&R Companies 1N 372 Main St. Glen Ellyn, IL 60137 USA 31
Tel: +630-858-6101 Fax: +630-858-6134 www.mrprint.com | store.mrprint.com
Mega-Stamp
Down
Midas Table In
Position
Midas Auto
Cycle
The next menu is Mega-Stamp Down. The menu
is displayed in red so it is an output signal. The
illustration shows that the proximity switch which is
used to confirm Mega-Stamp Down is currently
OFF. When the proximity switch is actuated the
indication will display ON.
The next menu is Midas Table In Position. The
menu is displayed in red so it is an output signal.
The illustration shows that the proximity switch
which is used to confirm Midas Table In Position
is currently OFF. When the proximity switch is
actuated the indication will display ON.
The final menu is Midas Auto Cycle. The menu is
displayed in red so it is an output signal. The
illustration shows that the proximity switch which is
used to confirm Midas Auto Cycle is currently
OFF. When the proximity switch is actuated the
indication will display ON.
Press the Back Arrow to return to the previous
screen or the OPTIONS button to return to the
OPTIONS screen.
Flocker
Flocker is used to select the print station location
in which the M&R Flocker 2000 will operate.
To select, press the Flocker button on the
Options screen.
Press the print station number to operate as a
Flocker station. As you press the print station
number, the indication changes to green and
displays a vertical line for On. If you press the
print station number again, the indication changes
back to red and displays a zero for Off.
Press the None button and none of the print
stations will operate as a Flocker station.