M&R Challenger 2 - Index Motion Information

V.033114
M&R Companies 1N 372 Main St. Glen Ellyn, IL 60137 USA 43
Tel: +630-858-6101 Fax: +630-858-6134 www.mrprint.com | store.mrprint.com
HARDWARE TEST menu.
Index Motion
Information
To access the INDEX MOTION screen, press the
INDEX MOTION button on the HARDWARE TEST
screen.
As the servo drive operates, it maintains
communication with the PLC. The motion card
sends and receives signals from the servo drive
that constantly monitors the position and speed of
the servo drive. These signals and control
parameters are displayed on the INDEX MOTION
screen as a visual indication of the servo drive
performance.
Index Servo
Information
To access the INDEX SERVO screen, press the
INDEX SERVO button on the HARDWARE TEST
screen.
As the servo drive operates the INDEX SERVO
screen displays information on the speed, position
and mechanical loads seen by the servo drive.
Index Servo
History
To access the INDEX SERVO HISTORY screen,
press the INDEX SERVO HISTORY button on the
HARDWARE TEST screen.
This menu selection displays historical data for the
motion card. This information is for the use of M&R
Technical Representatives only and should not be
accessed or used by operators unless instructed
by M&R Technical Service personnel.
Press the Back Arrow to return to the
HARDWARE TEST screen.
MPR Data
To select MPR Data press the MPR Data button
on the MENU screen.
The optional MPR Data menu item is designed for
use with the M&R Management Production Report
software package. A detailed logging builds a
database, which may be used for cost analysis,
job tracking, production volume reporting, press
utilization and down time analysis.
The MPR Data report filters, compiles and formats
this data for output to any compatible computer.
Please refer to the instructions supplied with your
MPR Data software package.