2 - 222 - 22
DISPLACEMENT TRANSPORTATION MODE / WORKING MODE
Before the displacement an d the u se of the machine, remove, if
necessary, the blockage of the turret (see Fig. A).
The contactor 2 (Fig. B) should be in the position A (transfer of commands on
the desk of the platform).
The access platform has two modes of displacements: the transportation
mode (Fig. C) and the working mode (Fig. D).
-Transportation mode: The arms of the access platform are in lower position.
This mode is used to translate with max. speed and to move out of the slope
of the machine (Fig. C) .
-Working mode: One or many arms of the access platform are lifted or the
telescope is gone out. In this mode, the translation are made with a small
speed, the safeties for the slope and the overload are activated. (Fig. D).
USE OF THE ACCESS PLATFORM
A
B
D
To Next Page
Loading...
