12
DORADO PRO 37MM SERVICE GUIDE
7
8
9
Once no air bubbles are present, close LSC and HSC to
Max. With bleed hose clamps closed SLOWLY compress
damper shaft to force oil through compression circuits.
Closing the bleed hose clamp on both syringes cycle the
damper SLOWLY to draw air to the top of the damper.
Open bleed hose clamps and repeat step 3 and 4 until
no air bubbles are present in oil drawn into upper
syringe.
Return the cartridge to full extension, push oil from end
cap to top cap.
PRO DAMPER SERVICE
To Next Page