Manitou M Turbo Series - TECHNICAL SPECIFICATIONS

2
1
MHT 10120 L M
Series
Engine (E3)
- Type MERCEDES-BENZ (OM 904 LA)
- Cylinders number 4
- Number of strokes 4
- Injection system direct
- Firing order 1.3.4.2.
- Displacement 4250 cm
3
- Bore 102 mm
- Stroke 130 mm
- Volumetric ratio 18 : 1
- Nominal rpm 2200 rpm
- Idling rpm 800 rpm
- Power 175 CV / 129 Kw
- Maximum torque 675 Nm from 1200 to 1600 rpm
Cooling system:
- Type Water cooled
- Intake fan 1750 rpm
Number of blades 7
- Diameter 550 mm
Thermostat
- Complete open 95° C
Electrical circuit :
- Ground Negative
- Battery 12 v - 120 Ah
- Alternator 14 v - 90 ÷ 150 A
- Voltage regulator incorporated in the alternator
- Starting 12 v
Brake :
- Type Disc brakes in oil bath
- Service brake Foot pedal actuated on front and rear axles
- Parking brake Lever actuated on front and rear axle
negative type
SPECIFICATIONS
SPECIFICATIONS
(259.3 in3)
(4.0 in.)
(5.1 in.)
(498 ft/lb.)
(21.7 in.)
(203°F)
INTRODUCTION TO SAFETY