3
MATTOC TRAVEL ADJUST MANUAL
INTRODUCTION
This manual is intended to guide the user through the steps necessary to internally adjust
the travel of the Maoc Pro and Expert forks. NOTE: This manual does not cover the
steps need to convert the fork from one wheel size to another. Please see the Maoc
Service Guide for instrucons on how to perform this.
Suspension forks by design can contain preloaded springs, gases and
uids under extreme pressures. Warnings contained in this manual must be observed to
avoid damage to fork, serious injury or even death.
We highly recommend that service to this fork be performed by a
cered bicycle mechanic. Failure to follow instrucons presented in this manual could
lead to serious injury or death. Any quesons about the servicing of this fork or the
manual itself should be directed to Manitou Customer Support at:
Phone: 888-686-3472
Email: techsupport@hayesbicycle.com
To Next Page
Loading...
Need help?
General
