1 - 17
LIFT TRUCK DISPOSAL
MANITOU complies with the regulations deriving from Directive 2000/53/EC relating to lift truck end-of-life.
This lift truck contains no substances or materials forbidden by Directive 2000/53/EC.
NOTE: Make sure that the disposal of process materials and of spare parts is carried out in total safety and
inanecological way.
Consult your dealer before disposing of the lift truck.
RECYCLING OF MATERIALS
METALS
• Metals are 100 % recoverable and recyclable.
PLASTICS
• Plastic parts are identified with a marking in accordance with current regulations.
• A limited range of materials is used to simplify the recycling process.
• The majority of plastic components are made of "thermoplastic" plastics, that are easily recycled by melting,
granulatingor grinding.
RUBBER
• Tires and seals can be ground for use in cement manufacture or to obtain reusable granules.
GLASS
• Glass items can be removed and collected for processing by glaziers.
ENVIRONMENTAL PROTECTION
By entrusting the maintenance of your lift truck to the MANITOU network, the risk of pollution is limited and the contribution
to environmental protection contribution is made.
WORN OR DAMAGED PARTS
• Do not dump them in the countryside.
• MANITOU and its network have signed-up to a scheme of environmental protection through recycling.
USED OIL
• The MANITOU network organizes the collection and processing of used oil products.
• By handing over your waste oil to MANITOU, the risk of pollution is limited.
USED BATTERIES
• Do not throw away batteries, as they contain metals that are harmful for the environment.
• Return them to the MANITOU network or any other approved collection point.
NOTE: MANITOU seeks to manufacture lift trucks that provide the best performance and limit polluting emissions.
647503 (10/05/2017)
E 418/420/425C 48V S3
To Next Page
Loading...
Need help?
General