Manitou MRT-X 2150 Privilege Plus ST3A S2 Original Operator's Manual

2-58
EN
648970 IT-EN-ES (04/10/2016) MRT-X 2150 Privilege Plus ST3A S2 / MRT 2150 Privilege Plus ST4 S2 MRT-X 2550 Privilege Plus ST3A S2 / MRT 2550 Privilege Plus ST4 S2
Inducement strategy
Notifications Descriptions Operator Actions
Low DEF Tank Level Warning: The DEF
level is now between 7.5 and 10% full.
Fill DEF tank to full. If DEF lamp is still
illuminated there may be improper DEF
quality. Call for service.
LIM
Low DEF Tank Level: DEF level is between
5 and 7.5%. Low inducement begins (75%
torque).
Fill DEF tank to full. If DEF lamp is still
illuminated there may be improper DEF
quality. Call for service.
LIM
Low DEF Tank Level: DEF level is between
2.5 and 5%. Severe inducement begins
(60% rated speed / 50% torque).
Park equipment and fill DEF tank.
If DEF lamp is still illuminated there may be
improper DEF quality. Call for service.
LIM
Low DEF Tank Level: DEF level is between
0 and 2.5%. Ultra severe inducement begins
(idle speed / 20% torque).
Immediately park equipment in safe location
and fill DEF tank. If DEF lamp is still illuminated
there may be improper DEF quality. Call for service.
LIM
Low DEF Tank Level: DEF level is at 0%.
Final inducement begins (Engine idle / 20%
torque)..
Immediately park equipment in safe location
and fill DEF tank. If DEF lamp is still illuminated
there may be improper DEF quality. Call for service.
Poor DEF Quality Warning: Poor DEF
quality is detected and there is one hour
before inducement process takes place.
If DEF tank is above 10% full and these
lights are illuminated there may be a quality
issue with the DEF. Call for service.
LIM
Poor DEF Quality: Low inducement is
taking place. Within 15 minutes torque is
reduced from 100 to 75%.
If DEF tank is above 7.5% full and these
lights are illuminated there may be a quality
issue with the DEF. Call for service.
LIM
Poor DEF Quality: Severe inducement is
taking place. Within 25 minutes the rated
speed is reduced to 60% and torque to 50%.
If DEF tank is above 5% full and these lights
are illuminated there may be a quality issue
with the DEF. Call for service.
LIM
Poor DEF Quality: Ultra severe inducement
is taking place. Within 8 minutes the rated
speed is reduced to idle and torque to 20%.
If DEF tank is above 2.5% full and these lights
are illuminated there may be a quality issue with
the DEF. Park vehicle and call for service.
LIM
Poor DEF Quality: Final inducement is
active. Engine speed is at idle with torque
limited to 20% until problem is fixed.
If DEF tank is not empty and these lights are
illuminated there may be a quality issue with the
DEF.
Immediately park vehicle and call for service.
Faulty Aftertreatment Equipment Warning:
Faulty equip. has been detected and there is
one hour before inducement process takes
place.
Some component of the aftertreatment system is
malfunctioning. Call for service.
LIM
Faulty Aftertreatment Equipment: Low
inducement is taking place. Within 15 minutes
torque is reduced from 100 to 75%.
Some component of the aftertreatment system is
malfunctioning. Call for service.
LIM
Faulty Aftertreatment Equipment: Severe
inducement is taking place. Within 25 minutes
the rated speed is reduced to 60% and torque
to 50%.
Some component of the aftertreatment
system is malfunctioning. Call for service.
LIM
Faulty Aftertreatment Equipment: Ultra
severe inducement is taking place. Within 8
minutes the rated speed is reduced to idle
and torque to 20%.
Some component of the aftertreatment
system is malfunctioning. Park vehicle and
call for service.
LIM
Faulty Aftertreatment Equipment: Final
inducement is active. Engine speed is at idle
and torque is limited to 20% until problem is
fixed.
Some component of the aftertreatment
system is malfunctioning. Immediately park
vehicle and call for service.

Manitou MRT-X 2150 Privilege Plus ST3A S2 Specifications

General

Brand	Manitou
Model	MRT-X 2150 Privilege Plus ST3A S2
Category	Construction Equipment
Language	English