2-68
EN
IT
EN ESES
648970 IT-EN-ES (04/10/2016)
MRT-X 2150 Privilege Plus ST3A S2 / MRT 2150 Privilege Plus ST4 S2
MRT-X 2550 Privilege Plus ST3A S2 / MRT 2550 Privilege Plus ST4 S2
F5 ALARM PAGE (4.11)
The indicators with the red light on the central
unit or the component indicate an error or an
anomaly.
1 - Display in cab (4.11)
2 - MC2M Unit on turret (4.11)
3 - MC2M unit on frame (4.11)
4 - Safety system (MSS) (4.11)
5 - Winder on boom (4.11)
6 - Encoder Unit (turret rotation sensor) (4.11)
7 - Acknowledgement of attachment (4.11)
8 - Manipulator (4.11)
9 - Manipulator (4.11)
10 - I.C. engine alarm (4.11)
11 - Pressure transducers (4.11)
12 - Distributor (4.11)
13 - Hydrostatic transmission alarm (4.11)
14 - Maintenance required (4.11)
15 - Engine unit error codes (4.11)
16 - Alarm/fault (4.11)
17 - Radio remote controles (4.11)
18 - Safety system exclusion (4.11)
19 - Alarm / Warning codes (4.11)
20 - Coloured bar indicates load conditions
(4.11)
21 - Distributor errors (4.11)
p
In the event of a component
failure, the system stops all the
movement.
F5 PAGINA ALLARMI (
4.11)
Le spie che si illuminano di rosso su l’unità
centrale o il componente segnalano un errore o
un anomalia.
1 - Display in cabina (4.11)
2 - Unità MC2M su torretta (4.11)
3 - Unità MC2M su telaio (4.11)
4 - Sistema di sicurezza (MSS) (4.11)
5 - Arrotolatore su braccio (4.11)
6 - Unità Encoder (sensore rotazione torretta)
(4.11)
7 - Riconoscimento dell’accessorio (4.11)
8 - Manipolatore (4.11)
9 - Manipolatore (4.11)
10 - Allarme motore termico (4.11)
11 - Trasduttori di pressione (4.11)
12 - Distributore (4.11)
13 - Allarme trasmissione idrostatica (4.11)
14 - Manutenzione richiesta (4.11)
15 - Codici errori centralina motore (4.11)
16 - Allarme/anomalia
17 - Radiocomando (4.11)
18 - Esclusione sistema di sicurezza (4.11)
19 - Codici di Allarmi / Attenzioni (4.11)
20 - Barra colorata che indica le condizioni del
carico. (4.11)
21 - Errori distributore (4.11)
p
In caso di guasto di un
componente, il sistema blocca
tutti i movimento.
4.11
3
1
2
5
4
7
6
9
8
10
12
14
11
13
16
19
17
15
18
20
21
16
F5 PÁGINA ALARMAS (4.11)
Las luces testigo que se ponen rojas en la unidad
central o el componente señalan un error o una
anomalía.
1 - Pantalla en cabina (4.11)
2 - Unidad MC2M en la torre (4.11)
3 - Unidad MC2M en el bastidor (4.11)
4 - Sistema de seguridad (MSS) (4.11)
5 - Bobinador en el brazo (4.11)
6 - Unidad Encoder (sensor rotación torre)
(4.11)
7 - Reconocimiento del accesorio (4.11)
8 - Manipulador (4.11)
9 - Manipulador (4.11)
10 - Alarma motor térmico (4.11)
11 - Transductores de presión (4.11)
12 - Distribuidor (4.11)
13 - Alarma transmisión hidrostática (4.11)
14 - Mantenimiento requerido (4.11)
15 - Códigos errores centralita motor (4.11)
16 - Alarma/anomalía
17 - Mando a distancia (4.11)
18 - Exclusión del sistema de seguridad (4.11)
19 - Códigos de alarma / Atenciones (4.11)
20 - Barra coloreada que indica las condiciones
de la carga. (4.11)
21 - Errores distribuidor (4.11)
p
En el caso de un fallo de un
componente, el sistema bloquea
todos los movimientos.