Fitting the rack (standard model)
1.
To fit the two racks, follow the steps for removing the
racks in the reverse order.
2.
Check that the top rear clip on each rack has been fixed
in place so that the racks are attached properly.
3.
■
To check that you have fitted both racks correctly, insert
a baking tray.
■
Check that you have inserted the baking tray correctly
in or on the rails as specified in 'Placing the food con‐
tainers in appliances of size X.10' on page 42
or 'Plac‐
ing the food containers in appliances of size X.20' on
page 44.
4 Cooking procedures
User manual 84
To Next Page
Loading...
Need help?
General
