Removing the rack (bakery model)
1.
Lift up (1) the rack slightly.
Pivot it forwards slightly (2) towards the appliance door
and slightly inwards (3) into the cooking chamber in order
to release the rack from the pins at the bottom of the
cooking chamber.
Let the rack drop down to rest on the floor of the cooking
chamber.
2.
Disengage the rack from the two top pins in the cooking
chamber by again tilting the rack forwards slightly (1) to‐
wards the appliance door and then carefully releasing it
downwards (2) from the last pin (top front of the cooking
chamber).
Fitting the rack (bakery model)
1.
To fit the two racks, follow the steps for removing the
racks in the reverse order.
2.
Check that all eight studs (four on each side) are engag‐
ed correctly in the guides for the racks.
3.
■
To check that you have fitted both racks correctly, insert
a baking tray.
■
Check that you have inserted the baking tray correctly
in or on the rails as specified in 'Placing the food con‐
tainers in appliances of size X.10' on page 42 or 'Plac‐
ing the food containers in appliances of size X.20' on
page 44.
4 Cooking procedures
User manual 85
To Next Page
Loading...
Need help?
General
