Manitowoc Indigo NXT Series Technician's Handbook

Part Number: 000015431 Rev01 5/19 175
LIQUID LINE FILTER-DRIERS
The filter-driers used on Manitowoc ice machines are
manufactured to Manitowoc specifications. A Manitowoc
drier has dirt-retaining filtration, with fiberglass filters
on both the inlet and outlet ends. This is very important
because ice machines have a back-flushing action that
takes place during every Harvest cycle.
The size of the filter-drier is important. The refrigerant
charge is critical. Using an improperly sized filter-drier
will cause the ice machine to be improperly charged with
refrigerant.
Important
Driers are covered as a warranty part. The drier must
be replaced any time the system is opened for repairs.
SUCTION FILTER

traps particulate only, and do not contain a desiccant. The
filter needs replacement when:
1. The pressure drop across the drier exceeds 2 psig.
2. A compressor is replaced.
3. Refrigeration system contains contaminants.

Manitowoc Indigo NXT Series Specifications

General

Model	Indigo NXT Series
Ice Production	Varies by model
Ice Storage	Varies by model
Energy Efficiency	Energy Star certified models available
Refrigerant	R290 (varies by model)
Cooling System	Air-cooled or water-cooled (varies by model)
Condenser Type	Air-cooled, Water-cooled, or Remote
Touch Display	Yes, with intuitive interface
Control	Cleaning Alerts
Features	Self-cleaning, remote monitoring, energy-saving modes
Power Supply	Varies by model (typically 115V or 208-230V)
Dimensions (H x W x D)	Varies by model
Weight	Varies by model