Manitowoc Indigo NXT Series Technician's Handbook

Part Number: 000015431 Rev01 5/19 189
Diagrams
Wiring Diagrams
The following pages contain electrical wiring diagrams. Be
sure you are referring to the correct diagram for the ice
machine you are servicing.
n
Warning
Always disconnect power before working on electrical
circuitry.
Some components are wired differently on energy efficient
machines. Please verify your model number (“CVD
Condensing Units” on page 20) to reference the correct
diagrams.
WIRING DIAGRAM LEGEND
The following symbols are used on all of the wiring
diagrams:
Equipment Ground
( ) Wire Number Designation
(The number is marked at each end of the wire)
—>>— Multi-Pin Connection
—> (Electrical Box Side)
>— (Compressor Compartment Side)
Male/Female Disconnect
Crimp Connector

Manitowoc Indigo NXT Series Specifications

General

Model	Indigo NXT Series
Ice Production	Varies by model
Ice Storage	Varies by model
Energy Efficiency	Energy Star certified models available
Refrigerant	R290 (varies by model)
Cooling System	Air-cooled or water-cooled (varies by model)
Condenser Type	Air-cooled, Water-cooled, or Remote
Touch Display	Yes, with intuitive interface
Control	Cleaning Alerts
Features	Self-cleaning, remote monitoring, energy-saving modes
Power Supply	Varies by model (typically 115V or 208-230V)
Dimensions (H x W x D)	Varies by model
Weight	Varies by model