Manitowoc Indigo NXT Series Technician's Handbook

42 Part Number: 000015431 Rev01 5/19
Step 5 Wait until the clean cycle is complete, then
disconnect power to the ice machine (and dispenser when
used).
n
Warning
Disconnect the electric power to the ice machine at
the electric service switch box.
Step 6 Remove parts for cleaning.
Please refer to the proper parts removal for your ice
machine. Continue with next step when the parts have
been removed.
“Single Evaporator Ice Machines” on page 45
“Ice Beverage Ice Machines” on page 47
“Dual Evaporator Ice Machines” on page 49
Step 7 Mix a solution of cleaner and lukewarm water.
Depending upon the amount of mineral buildup, a larger
quantity of solution may be required. Use the ratio in the
table below to mix enough solution to thoroughly clean all
parts.
Solution Type Water Mixed With
Cleaner 1 gal. (4 L)
16 oz (500 ml)
cleaner

Manitowoc Indigo NXT Series Specifications

General

Model	Indigo NXT Series
Ice Production	Varies by model
Ice Storage	Varies by model
Energy Efficiency	Energy Star certified models available
Refrigerant	R290 (varies by model)
Cooling System	Air-cooled or water-cooled (varies by model)
Condenser Type	Air-cooled, Water-cooled, or Remote
Touch Display	Yes, with intuitive interface
Control	Cleaning Alerts
Features	Self-cleaning, remote monitoring, energy-saving modes
Power Supply	Varies by model (typically 115V or 208-230V)
Dimensions (H x W x D)	Varies by model
Weight	Varies by model