To Next Page

To Previous Page

Lubrication Guide MLC300

F2280-20

Published 07-21-21

NOTE 1 Soak the breathers in non-flammable solvent

and blow dry with compressed air.

NOTE 2 Inspect the breather weekly. Replace the

cartridge with a new one when all of the

desiccant beads turn dark green. The dessicant

beads are gold when new.

Item Description Required Service

Every 40 Hours of Operation or Weekly (whichever comes first)

W1 Swing Gear Box Oil Fill and Breather Plug (2 places) Clean each (see NOTE 1).

W2 Batteries Check the electrolyte level.

W3 Pump Drive Fill Plug Clean (see NOTE 1).

W4 Drum Pawl and Lever (Drum 4, 5, and 6) Apply open gear oil to sliding surfaces of Pawl and

Lever.

W5 Hydraulic Tank Breather Inspect and replace (see NOTE 2).

W6 Drum Gearbox Oil Filling / Breather Plug (1 each drum) Clean each (see NOTE 1).

W6a

Drum Motor Shaft Oil Filling / Breather Plug (each free fall

drum)

Clean each (see NOTE 1).

P2348

Desiccant Breather

Desiccant

Beads

Service

Indicator

FOR REFERENCE

ONLY

Manitowoc MLC300 Guide

Other manuals for Manitowoc MLC300