National Crane 3-29-2018 Control # 610-00 2-39
NBT40-1 SERIES OPERATOR MANUAL SAFETY INFORMATION
NOTE: If your crane is equipped with CraneSTAR, an
overload warning will be posted to the web site
for review by the equipment owner.
Overload warnings do NOT indicate real time
events! Warnings could be sent 24 hours (or
more) after the actual event.
WARNING
Overload Hazard!
To avoid an accident caused by overload damage to
your equipment:
• Perform the inspections outlined in this
publication for overloads up to 50%.
• Stop operating the equipment and contact
Manitowoc Crane Care immediately for overloads
of 50% and higher.
To Next Page
Loading...
