EasyManuals Logo
Home>Manitowoc>Ice Maker>SM050

Manitowoc SM050 User Manual

Manitowoc SM050
236 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #58 background imageLoading...
Page #58 background image
58 Part Number 8001119 10/19
Step 12 Use 1/2 of the sanitizer/water solution to
sanitize all foodzone surfaces of the ice machine and
bin. Use a cloth or sponge to liberally apply the
solution. When sanitizing, pay particular attention to
the following areas:
Evaporator plastic parts - including top, bottom and
sides
Bin bottom, sides and top
Do not rinse the sanitized areas.
Step 13 Replace all removed components.
Step
14 Reapply power and water to the ice machine
and place the toggle switch in the WASH position.
Add the proper amount of Manitowoc Ice Machine
Sanitizer to the water trough.
Disconnect electric power to the ice
machine
at the electric switch box before
proceeding.
Step 15 Wait until the sanitize cycle is complete
(approximately 22 minutes) then place the toggle
switch in the OFF position, disconnect power and
water supplies to the ice machine.
Step 16 Repeat step 6 to remove parts for hand
sanitizing.
Step 17 Mix a solution of sanitizer and warm water
.
Model Amount of Sanitizer
QM45 1.5 ounces (45 ml)
Q130 1.6 ounces (48 ml)
Q170 2.2 ounces (66 ml)
Q210 2.2 ounces (66 ml)
Q270 1.9 ounces (57 ml)
!
Warning
Solution
Type
Water Mixed With
Sanitizer 6 gal. (23 l) 4 oz (120 ml) sanitizer

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Manitowoc SM050 and is the answer not in the manual?

Manitowoc SM050 Specifications

General IconGeneral
BrandManitowoc
ModelSM050
CategoryIce Maker
LanguageEnglish

Related product manuals