Manta DVBT024PRO - Battery Installation

18 DVBT024PRO - ENG
ATTENTION: The remote works with most of the remotes (with IR control) on the market
ATTENTION: during the duplication procedure it is very important that the two remote controls re-
main stationary, avoiding vibrations that could compromise successful data transfer with consequent
duplication failure.
ATTENTION: The remote control can also program other devices (not only TV) that have are-
mote control.
ATTENTION
Keep batteries out of the reach of children. If batteries are swallowed, contact aphysician im-
mediately.
Do not use rechargeable (Ni-Cd) batteries.
Do not attempt to recharge, short-circuit, disassemble or dispose of the battery in are.
Do not drop, stand or hit the remote control. It may cause damage and malfunction.
Do not mix old and new batteries.
If the remote control will not be used for along time, remove the batteries.
Use only batteries of the specied size and type and install them correctly.
Do not incinerate or otherwise heat the batteries as they may explode or leak.
BATTERY INSTALLATION
Insert the batteries with the correct polarity (+) and (-) as shown below:
If the remote control does not work even when used near the device, replace the 1.5V AAA batteries
1. Take it o lid battery according with
direction arrows .
2. Insert two 1.5V AAA batteries, paying at-
tention to the correct polarities (+ and -)
3. Replace the battery cover.