Manta MM336 - Ios APP

To Next Page

To Previous Page

USER’S MANUAL

4. Enter Playback mode

5. Shutter button

6. Photo mode

7. Video mode

8. Wi-Fi signal icon

9. DV battery icon

iOS APP

1. Install SYMAGIX APP (provided by dealer or via internet) on iOS phone

or tablet. When installation completes, the LCD will display icon

2. Insert the Micro SD card and turn on the DV, then press the Wi-Fi button

to enable it. Now you can see the Wi-Fi icon on the LCD.

3. Enable Wi-Fi on iOS phone or tablet and search for wireless AP sig-

nal MM336, then connect it to DV, until the system displays “Connected

successfully”.

Note:

The first time connecting to DV, you need to enter password

“1234567890”.

4. Click the icon

in the App list of the iOS phone or tablet to open it. Now you can

preview the image sent by the DV on the phone or tablet and start some oper-

ating. The operation interface on terminal is shown in the following ﬁgure.