Marantz 10 - Page 59

Tips
I want to adjust the tone myself
0
Press the OPTION button to adjust “Tone” setting on the option menu. (v p. 42)
I want to turn the display off
0
Press the DIMMER button to adjust the display’s brightness on the dimmer menu. (v p. 44)
I want to turn off the front panel illumination, interior illumination and display
0
Press the LIGHTING button to turn off. (v p. 45)
I want to use two or more of MODEL 10 units for high quality playback
0
Use the stereo complete bi-amp connections. (v p. 29)
0
Use the multi-channel playback connections. (v p. 31)
I want to operate a Marantz SACD player and streaming preamplifier using the remote control of this unit
0
Marantz SACD player and streaming preamplifier can also be operated with the remote control of this unit. Also refer to the SACD player and streaming
preamplifier instruction manuals for those players. (v p. 13)
I want to use this unit as a power amplifier
0
Connect a pre-amplifier to the POWER AMP IN connectors of this unit and switch the input source to “Power Amp Balanced” or “Power Amp
Unbalanced”. (v p. 24)
I want to use this unit as a pre-amplifier
0
Connect a power amplifier to the PREAMP OUT connectors of this unit. (v p. 24)
I want to use more than one unit in one location
0
Set individual remote control codes for each combination of devices and remote control. (v p. 52)
Contents
Connections Playback Settings Tips Appendix
59
Front/Top
panel
Rear panel
Remote control
unit
Index