Refer to the example connection for “Example layout for Auro-3D 11.1
channel system” (v p. 57) when playing Auro-3D with a 11.1-channel
system using the basic 5.1-channel system and the front height, surround
height, top surround and center height speakers.
Also refer to the connection example for “Example layout for Auro-3D 13.1
channel system” (v p. 60) when playing Auro-3D with a 13.1-channel
system by adding the surround back, top surround and center height
speakers.
0
In addition to the connections described in
p.50 - 64, this unit allows for various
speaker connections with the “Amp Assign” setting.
Also refer to the menu screen in “View Terminal Config.” on the “Amp Assign”
setting screen, which shows how to make connections in your environment.
Front
Center
Surround Surround Back Fr ont Wide F ront Hei ght
Subwoofer 1 Subwoofer 2 Subwoofer 3 Subwoofer 4
Subwoofer 1 Subwoofer 2 Subwoofer 3 Subwoofer 4
Rear Height Top Middle CH / TS
Speakers/Amp Assign
Back
Contents
Connections Playback Settings Tips Appendix
49
Front panel Display Rear panel Remote Index
To Next Page
Loading...
