Connecting the external antennas for Bluetooth/Wireless connectivity
1. For each of the two antennas: Place the antenna evenly over the antenna terminal located at the upper left or
right corner of the rear panel.
2. Turn the antenna clockwise until it is fully connected. Do not over tighten.
3. Rotate the antenna upwards for the best possible reception.
Setup
There are four steps to the setup process.
1. Installing batteries in the remote control unit
2. Connecting the Pre Tuner, Power Amplifi er and your TV
3. Following the On-Screen Setup Assistant
4. Downloading the Mobile Apps
1 Installing batteries in the remote control unit
2 Connecting the Pre Tuner, Power Amplifi er and your TV
To Next Page
