Marantz AV7705 - Manual Setup; Amp Assign

Manual Setup
Perform when setting the speakers manually or when changing settings
made in Audyssey
®
Setup.
0
If you add or remove a speaker after performing Audyssey
®
Setup, you
will no longer be able to select Audyssey MultEQ
®
XT32, Audyssey
Dynamic EQ
®
or Audyssey Dynamic Volume
®
. (v p. 181)
0
“Manual Setup” can be used without changing the settings. Please set if
necessary.
Amp Assign
You can change the Pre Amplifier assignment according to your speaker
system.
o
Assign Mode
Select how to use the Pre Amplifier.
You need to configure the detailed settings for the speaker
configuration in accordance with the selected mode. Select Assign
Mode configure the corresponding detailed settings.
11.1ch
(Default):
0
All Pre Amplifiers of this unit are used
for MAIN ZONE.
9.1ch (Bi-Amp):
0
The Pre Amplifier of this unit is
assigned to 2-channels for creating bi-
amp connections with the front
speaker.
0
You can connect speakers for up to
9.1-channels for MAIN ZONE.
9.1ch + Front B:
0
The Pre Amplifier of this unit is
assigned to 2-channels for connecting
to the second front speaker.
0
You can connect speakers for up to
9.1-channels for MAIN ZONE.
Contents Connections Playback Settings Tips Appendix
217
Front panel Display Rear panel Remote Index