o
Vertical Stretch
Sets whether video signals are vertically stretched or not.
On: Stretches video signals vertically.
Off
(Default) :
Does not stretch video signals vertically.
NOTE
“Vertical Stretch” can be set when “i/p Scaler” is set to anything other than “Off”.
(v p. 212)
o
HDMI Pass Through
Selects how this unit will transmit HDMI signals to the HDMI output in
standby power mode.
On
(Default):
Transmits the selected HDMI input
through the AV pre tuner’s HDMI output
when this unit is in standby power mode.
Off:
No HDMI signals are transmitted through
this unit’s HDMI output in standby power
mode.
Contents Connections Playback Settings Tips Appendix
208
Front panel Display Rear panel Remote Index
To Next Page
Loading...
