Marantz DR6000 Service Manual

6
The purpose of the dealer mode is to prevent people taking out
the CD inside the player at exhibitions, showrooms etc.. This
mode disables the open/close function of the player.
The dealer mode can be switched on and off pressing keys
[OPEN/CLOSE] and [STOP] of the CDR player simultaneously
while switching on the unit. The dealer mode is stored in the
flash memory and can only be changed by executing the above
actions.
5. Diagnostic Software
5.1 Dealer mode
5.2 Dealer diagnostics
Figure 5-1
5.2.1 Description
The intention of the dealer diagnostics is to give an indication
of the CDR player status. An inexperienced, even non-technical
dealer will/can perform the test. Tests are executed
automatically without need for external tools or disassembly of
the unit. This test checks the CDR main board using the same
tests as the electrical service diagnostics program. Only the
result of the test, "PASSED" or "ERROR", will be shown on the
display. Pressing keys [F FWD] and [REWIND] simultaneously
while switching on the unit, starts the test. Switching off the unit
ends the test.
5.2.2 Requirements to perform the test
Press <REWIND> + <FFWD>
simultaneously and switch
ON unit
Set OK?
To end test, switch OFF unit
“
Set displays
PASSED ”
Display blinks
“BUSY”
during test
YES
NO
Set displays
“ERROR”
• Working keyboard to start up the test.
• Working local display to check the output messages.

Marantz DR6000 Specifications

General

Brand	Marantz
Model	DR6000
Category	Recording Equipment
Language	English