28
Check the Automatic in Pro tec tion.
Check the Advanced in Mes sag ing.
Click Finish.
Protection から Automatic にチェックを入れます。
Messaging から Advanced にチェックを入れます。
Finish をクリックします。
以上で設定は完了です。
Check the BOOT Mode in Select Con nec tion.
Choose the 9600 in Select Baud rate.
Remark: Please remove check mark, if it is contained
in Use De fault.
Select Connection: から BOOT Mode にチェックを入れ
ます。
Select Baud rate: から 9600 を選びクリックします。
注意
) Use Default にチェックが入っていると Baud Rate
を変更できませんのでチェックを外してください。