Selecting the input source
1
Use INPUT ml to select the input source to be played
back.
The selected input source appears on the display.
0
You can also select the input source by turning INPUT selector on the main unit.
Adjusting the volume
1
Use VOLUME no to adjust the volume.
The volume level appears on the display.
0
You can also adjust the volume by turning VOLUME on the main unit.
Turning off the sound temporarily
(Muting)
1
Press :.
“Mute” is displayed on the display.
0
To cancel mute, either adjust the volume or press : again.
Adjusting the tone and balance
1
Press TONE/BALANCE to turn on tone balance control.
“TONE/BALANCE” is displayed on the display.
0
The tone and balance adjustment circuitry (BASS, TREBLE, and
BALANCE) is activated.
2
Turn the BASS, TREBLE and BALANCE on the main
unit to adjust the tone and balance.
Contents Connections Playback Settings Tips Appendix
24
Front panel Rear panel
Remote control
unit
Index
To Next Page
Loading...
