o
Update on web screen
Firmware can be updated using the “Web control function” (v p. 70).
“Web control function” (v
p. 70) settings must be completed in advance
on a computer belonging to the same network. For information on
obtaining update files, please contact our customer service center.
1
Click 4 from step 5 for the “Web control function”
(v
p. 70).
The computer will display the following screen.
Wait for approximately 1 minute.
You can also gain access by entering the IP address shown by the
unit into a web browser.
GThe web displayH
.
To Next Page
Loading...
