To Next Page
S
sweissSep 12, 2025
How to output DTS sound on Marantz NR1603?
- JJoseph VincentSep 12, 2025
Set “Decode Mode” on the menu to “Auto” or “DTS.”
How to output DTS sound on Marantz NR1603?
Set “Decode Mode” on the menu to “Auto” or “DTS.”
Why iPod cannot be played on Marantz Stereo Receiver?
Some iPods do not support being used connected directly to the iPod/USB port.
General| Receiver type | Surround |
|---|---|
| Audio output channels | 7.1 channels |
| Signal-to-Noise Ratio (SNR) | 98 dB |
| Power output per channel (1KHz@6 Ohm) | 60 W |
| Power output per channel (20-20KHz@8 Ohm) | 50 W |
| HDMI in | 6 |
| AC (power) in | Yes |
| Composite video in | 3 |
| Ethernet LAN (RJ-45) ports | 1 |
| Component video (YPbPr/YCbCr) in | 2 |
| Connectivity technology | Wired |
| Speakers connectivity type | - |
| Audio formats supported | AAC, FLAC, MP3, WAV, WMA |
| Image formats supported | JPG |
| Wi-Fi | No |
| Supported radio bands | FM |
| Product color | Black |
| Audio decoders | Dolby Digital EX, Dolby Digital Plus, Dolby Pro Logic IIz, Dolby TrueHD, DTS 96/24, DTS-ES, DTS-HD Master Audio |
| Apple docking compatibility | Not supported |
| Power consumption (standby) | 0.2 W |
| Power consumption (typical) | 220 W |
Weight and Dimensions| Depth | 367 mm |
|---|---|
| Width | 440 mm |
| Height | 105 mm |
| Weight | 8300 g |
Essential safety guidelines and warnings for operating the unit.
Automated speaker and room acoustic optimization using the Audyssey system.
Guide for playing music and controlling an iPod connected via USB.
Detailed procedures for installing and connecting speakers for advanced configurations.
Step-by-step instructions for connecting speaker cables to the unit's terminals.
Enables linked operation and control between HDMI-connected devices.
Setup and configuration for Audyssey audio optimization technologies.
Manual configuration of speaker settings when not using Audyssey.
Provides solutions for common operational problems and symptoms.
