Network(DMP): Enter 27 87 03
27 87 03 RCRC52708703
Network(DMP): Back(Return) 27 83 03
27 83 03 RCRC52708303
--- ---
Network(DMP):HOME 27 88 02
27 88 02 RCRC52708802
--- ---
Page Previous 27 93 13
27 93 13 RCRC52709313
--- ---
Page Next 27 93 14
27 93 14 RCRC52709314
--- ---
Notes: Specifications subject to change without prior notice.
X
The command is available for the model.
--- The command is NOT available for the model.
* 1 Main room commands work as Multi room commands when the Multi room RC-IN input was used.
These commands are recognized as for Main room(zone) commands when they are received via Front IR receiver or Rear Remote Control In.
These commands are recognized as for Multi room(zone) commands when they are received via Rear Multi room Remote In.
*2 Need an input assign to the input in Menu in advance the use
*4 /U1x version (for North America) model only
*5 /N1x version (for Europe) model only
*6 /U1x (for North America), /N1x version (for Europe) model only
*7 The RC code can be sent using RS-232C/IP Serial protocol commands
Revision
14-Mar-18 V01 Added NR1509/NR1609
Before Servicing
This Unit
Electrical Mechanical Repair Information Updating
66
To Next Page
Loading...
